Plans and kits unlimited

Projects Store About us Contact Research Msg Board
Lasers



DPSS Green Laser Pointers 5mW & 20mW

CO2 Laser Tubes CO2 Laser Power Supply 20mW DPSS Green Laser Module

Disclaimer:  Lasers can cause harm and death.  Do not buy any laser product from us if you plan to use it for illegal purposes.  Do not shine lasers into the eyes of pilots or motor vehicles.  Do not purchase a laser if it is illegal to own in your city or State.  You must be 18 years or older to purchase a laser product from Plans & Kits Unlimited.  By purchasing you acknowledge that you are 18 years or older and hold harmless Plans & Kits Unlimited of any liability arising from the use or misuse of any product purchased or obtained from Plans & Kits Unlimited or it's affiliates.


DPSS Green 532nm Laser Pointer 5mW, 20mW and 20mW Green Module


5mW Version pictured on left, 20mW Version in middle and 20mW module on right.

Scroll down for more pictures and details.

Brand New, DPSS Green 532nm Wavelength Laser Pointers.

After searching for years for a manufacturer that could supply affordable, reliable and powerful Green beam laser pointers - we finally found one.  Not leadlight or wicked or any of those other OVER priced brands.  These are super high quality like those seen in the sharper image and other world renowned sellers. 

We are the only dealer selling the Extreme Lasers Model EL5 and EL20.

Detailed Specs:  Model EL5 & EL20
*
Green Beam = CW (Continuous Wave) 532nm (532 nano meter) Wavelength
*Power requirements = 2x AAA Alkaline Batteries (Duracell Batteries Included**)
*Dimensions = Length 6.3" (16cm) X Diameter 0.55" (1.4cm)
*Construction = Aluminum Casing, Brass Laser Module housing, Glass Lense, Comes in metal gift box with foam fitted inserts (See pictures)
*Color = Metallic Silver Laser Pointer for 5mW and Softouch on aluminum housing for 20mW / Silver Color gift box
5mW Pointer is Class IIIA Laser Product  Standard Power Output is <5mW before any modifications (See below ad for mods)
20mW Pointer is Class IIIB Laser Product  Standard Power Output is <20mW before any mods, max output after mod is 30mW.
20mW Module is variable from 20mW to 30mW which requires additional heatsinking to cool it.  Class IIIB Laser.

 

Do not stare into beam as injury or blindness can occur.

  
You can see the beam!  The pictures above are simply shining the beam through a common drinking glass!

5mW price Only $60.00 + Shipping.
20mW price Only $80.00 + Shipping.
20mW module Only $60.00 + Shipping.

$60.00  Item#greenlaser (5mW Pointer)

$80.00  Item#20mwlaser (20mW Pointer)

$60.00  Item#20mwmodule (20mW Module)

 

FREE Modification for 5mW Pointer Below (others try to charge you $10 just for the plans, so here they are, FREE!!!*


5-10mW Modification for Model EL5

Step 1.

First you will need to gently separate the laser module from the main pointer body.  There a several ways to attempt this.  Gentle heat applied, a rocking motion in all directions and lastly wrap plastic electrical tape on both halves to give you better grip to slowly pull them apart.  To reassemble simply use a dab of super glue and make sure to slide the module in place so the button is lined up.

 Step 2.

Next you will notice the module, inspect it, learn it.  Make sure you do not try to perform this modification near static electricity as it may damage the components.

Step 3.
  
Next you will need to peel the adhesive padding away from the back side of the circuit board, do this carefully.  This will expose the small device called a potentiometer, it looks like a screw with an + in the center.

Step 4.

For this last step you will need a small jewelers screwdriver to turn the potentiometer.  Do this carefully and do not push too hard when turning.  You will need to locate the flat side on the turning part of the potentiometer, it will look like a circle with a flat side.  With the laser module facing, "Beam Output Left", you will want the flat side of the circle to your lower left as seen in the picture below.  You can lower the brightness by slowly turning the circle clockwise.

  

This concludes the modification steps for raising the power on your EL5 Green Laser Pointer.  It is not recommended that you try this modification as it will void your warranty and possible make your laser too powerful, thus it may break certain laws or regulations making it hazardous.  It may even burn skin or potentially cause fires.  Use caution.

**  Batteries included within Cont. United States, Canada and United Kingdom ONLY, other countries will not receive batteries due to export laws.  Duracel, Energizer or other comparable brand may be substituted without prior notice.  Warranty only covers laser if used with Alkaline AAA batteries ONLY, do not use lithium ion or rechargeable batteries.  Do not point beam into eyes, at airplanes or other flying aircraft, do not point beam at drivers of motor vehicles or other automobiles.  These lasers are strong and may cause permanent blindness or eye damage.  NOT FOR CHILDREN without supervision.

* Modifying the laser pointer in any way or removing the warning / spec label will void the warranty.  If you attempt to modify or remove the label and send it back as defective we will return it to you as is and void your warranty.  If you receive a defective laser pointer that does not work, do not attempt to open it, doing so will void the warranty.  Please email or call us to obtain authorization to return the unit back in the mail or by UPS ground.  Upon receipt we will inspect the laser and verify it is defective at which time we will either replace, repair or refund your money for the cost of the laser pointer, our choice.


CO2 Lasers & Power Supply

CO2 Laser Tubes & Power Supplies are available from our Affiliate Company SuperGasSaver CO2 Laser Division.  All payments are processed through SuperGasSaver.com Merchant Account.

 

Website and Contents are the sole property of Plans & Kits Unlimited.  1994-2005. All rights reserved.